Come over and tell you the precautions in the operation of the automatic liquid filling machine.

Regardless of whether it is for the health of the whole environment or for the long-term use of the equipment, some attention should be paid to the operation of the automatic liquid filling machine in the operation, so which place is the attention in the operation?

1. Keep the liquid filling machine clean. All pipes, especially those indirectly or in direct contact with materials, should be kept clean, brushed every week, water should be taken every day, every time to be sterilized; ensure that the filling machine is clean, and the material tank should be brushed and sterilized. , to ensure that the parts in contact with the material can not have fouling and bacteria.

2. To ensure the bio-stable sterilization of the bottled liquid during the production process. Control the time and temperature of sterilization to ensure the final effect, and avoid excessive sterilization time or excessive temperature, reduce liquid oxidation, and cool as soon as possible after sterilization to keep the temperature above 35 °C.

3. Low temperature filling is the minimum requirement for liquid filling. Under normal circumstances, liquid is not easy to be foamed in low temperature environment, which is beneficial for filling.

4. Before the filling machine, use 0 ~ 1 °C water to reduce the temperature of the filling machine tank and the conveying pipeline. When the filling temperature exceeds 4 °C, the temperature should be lowered first and then the filling operation is carried out. Using the heat preservation tank and constant temperature irrigation, the material can maintain a constant temperature during the specified time of filling, so as to prevent the filling machine from being unstable due to excessive temperature change.

5. The filling equipment should be isolated from other equipment as much as possible. The lubrication part of the filling machine and the filling material should be protected from cross-contamination. The lubrication of the conveyor belt should use special soapy water or lubricating oil.